Issue 12, 2024

Design of compressively strained PtRu alloy as anode for high-performance DMFCs

Abstract

Direct methanol fuel cells (DMFCs) are considered favorable for portable devices due to their high energy density and the widespread availability of methanol fuel. However, the commercialization of DMFCs has been severely limited by the sluggish reaction kinetics and poor stability of the anode. In this study, compressively strained PtRu alloy nanoparticles were deposited on a nanoporous thin film (NPTF) using a differential normal pulse voltammetry technique. The resulting compressive structure is confirmed through geometrical phase analysis, revealing high-level compressive strains of about −5%. Owing to the improved specific activity and high specific surface area, the compressively strained PtRu alloy nanoparticles exhibit outstanding Pt mass activities for methanol oxidation reaction. NPTF-Pt2Ru1 with a Pt/Ru molar ratio of 2/1 exhibits the highest Pt mass activity (1.64 A mgPt−1), approximately 4 times higher than that of commercial PtRu/C. When applied in membrane electrode assembly, this film anode in DMFCs further exhibits mass activity enhancement owing to the structural advantages such as weakened methanol cross-over. With a loading of 0.21 mgPt cm−2, the maximum power density at 80 °C reaches 117 mW cm−2, and the power efficiency of Pt is about 12 times higher than that of commercial PtRu/C (2 mgPt cm−2, 92 mW cm−2). Therefore, the methodology outlined in this study demonstrates a novel and effective means of synthesizing high-performance anode catalysts for DMFCs.

Graphical abstract: Design of compressively strained PtRu alloy as anode for high-performance DMFCs

Supplementary files

Article information

Article type
Research Article
Submitted
22 Feb 2024
Accepted
04 May 2024
First published
14 May 2024

Inorg. Chem. Front., 2024,11, 3633-3642

Design of compressively strained PtRu alloy as anode for high-performance DMFCs

S. Yin, K. Zong, L. Ban, H. Yin, X. Liu and Y. Ding, Inorg. Chem. Front., 2024, 11, 3633 DOI: 10.1039/D4QI00478G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements